Disassembling an iPhone to Repair Or Sell For Parts

Disassembling an iPhone to Repair Or Sell For Parts

There are a number of reasons why you might find yourself wanting to disassemble your iPhone. One reason could be if you are going to be purchasing a new cell phone and want to sell your old iPhone for parts to earn a little extra cash to offset the price of your new device. Another reason could be that one of your phone's components is broken and you want to repair it. Just because there is a problem with your iPhone, it does not necessarily mean that it is time for you to buy a new one. These devices can be pretty expensive, and it may be possible for you to fix the problem. Or, even if the broken part is beyond repair, you may be able to replace just that part without having to purchase an entire new phone.

If, for whatever reason, you are interested in learning how to disassemble your iPhone, take a look at the following steps to help get you started.

1. The first thing that you will need to do is to remove your phone's sim tray. Your phone probably came with a tool that is designed specifically for doing this. If you do not have the tool, though, you can use a paper clip.

2. Next, look for two small iPhone screws that are located on the side of your phone's dock. You will need to take out these screws to open the case.

3. Now you will need to separate the back panel from the display. To do this, locate the chrome ring and slide a tool between it and the glass front panel over the hole from one of the iPhone screws. Be gentle when exerting pressure so as not to break the glass.

4. Without breaking any of the ribbons, now lift the panel away from the dock end of your phone.

5. Look for ribbons labeled "1" and "2" on the main board and unplug them. After you have removed ribbon 2, you will see ribbon 3, which also needs to be unclipped. After disconnecting these three ribbons, take off the display assembly.

6. The next thing that needs to be done is releasing the motherboard. In order to do this, you will first have to locate and remove the seven iPhone screws that hold it in. One of these screws will be covered by a sticker that says "DO NOT REMOVE." You will also need to remove a ribbon labeled "4."

7. After setting the motherboard aside, you will need to take out your phone's battery by pulling up on a tab that is connected to it. You will find another screw that needs to be removed.

8. Taking out 9 more iPhone screws, now remove the camera, headphone jack, and flex cable.

9. The next component that will need to be removed is the speaker assembly. This part also includes the dock connector, antennae, and home button. To remove these, you will need to take out 2 more iPhone screws.

10. Setting this assembly aside, you will now need to take out the 5 screws that are holding the LCD to the front glass panel. Once the screws have been removed, you can separate the LCD from the glass panel.

Congratulations! You have now disassembled your iPhone.

Air Jordan Soft Cloth Shockproof Designer iPhone Case For iPhone 11 Pro Max X XS XS Max XR 7 8 Plus

Leave a Reply

Your email address will not be published. Required fields are marked *


*